Beautifully simple to install

Whether you are installing one electric towel bar or multiples, we have made installation a doddle.

 

How to install towel bars

Single or double fixing mount?

Select the fixing mount type below to access the relevant installation guides and information.

 

What's in the single mount box

Everything you need for easy installation is included. 1 x towel bar, 4 x fixing screws (for the mounting system), 1 x fixing spigot, 1 x dress ring, 2 x grub screws, 1 x allen key, 1 x 2m cold tail connection cable and installation instructions.

How to install - single mount

We have made installation of multiple electric heated towel bars simple. For the perfect installation, we always recommend using our patented towel bar mounting system. Unique to ThermoSphere, it makes towel bar installation stress-free and provides the finished installation with that jaw dropping ‘wow factor’!

With mounting system

Installing a multiple electric heated towel bars? We’ve made it super easy with our bespoke mounting system. Our installation video shows how straightforward the demonstrated steps are to complete or download the installation guide.

With mounting spigots

Just installing a single electric heated towel bar? No problem. There’s no need to use the mounting system as installation is easy. Just follow the simple steps demonstrated in the single without mount video or download the installation guide.

How to wire

The mounting system makes cable management easy. You can run the cables behind the mounting system and drill a hole at the top to pass them into the cavity and up to your wiring point. If you‘re installing on a solid brick/block wall you will need to chase a channel for the cables.

What's in the double mount box

Everything you need for easy installation is included. 1 x towel bar, 2 x mounting studs with fixings, 2 x grub screws, 1 x allen key, 1 x 2m cold tail connection cable and installation instructions.

How to install - double mount

We have made installation of multiple electric heated double mount towel bars simple. For the perfect installation, we always recommend using our patented towel bar mounting system. Unique to ThermoSphere, it makes towel bar installation stress-free and provides the finished installation with that jaw dropping ‘wow factor’!

With mounting system

Installing a multiple electric heated towel bars? We’ve made it super easy with our bespoke mounting system. Our installation video shows how straightforward the demonstrated steps are to complete or download the installation guide.

With mounting spigots

Just installing a single electric heated towel bar? No problem. There’s no need to use the mounting system as installation is easy. Just follow the simple steps demonstrated in the single without mount video or download the installation guide.

Over a finished wall

Just installing a single electric heated towel bar? No problem. There’s no need to use the mounting system as installation is easy. Just follow the simple steps demonstrated in the single mount video or download the installation guide.

How to wire

How to wire a single towel bar or multiple, we have created a visual guide on how our towel bars should be wired. Final electrical connections must be completed by a qualified electrician. Wiring schematics can be found within the installation guide.

Our 3 top installation tips

Idea

Transformer

You will require a transformer because they are 12V.

Low Profile

28mm tiling depth

Max 28mm tiling depth over spigots to make sure there is enough spigot protruding out of the wall to fix to.

Safety

Wear gloves

Wear latex gloves when handling the bars to avoid finger prints and scratches.

Have an installation question?

If you have a question that needs an answer, our comprehensive FAQs page is packed full of them. However, we know that some questions are more complex than others so our team are always available to help.

 

Contact one of the team