The NEW heating cable that makes installation easier and faster

Our in-line joint membrane cables make installation easier because installers don’t have to cut into the membrane, insulation board, or chase out concrete. Cutting and chasing also makes joints the most common point of failure during installation. Removing the bulky joint removes that risk too.

Very. You can simply press the cable into the membrane mat, covering the whole of the heated area, and you’re done. Because there are no bulky joints or thicker cold tail cables, installation is a one-step process. The membrane and cable are automatically flush and ready for tiling. 

Watch the installation guide

There are four new cable lengths: 42m, 55m, 90m and 175m. But all the existing lengths will become in-line joint too, which means you’ll have a cable for every project.

It’s the same price, but better cable, so nothing needs to change with the way you work. The only difference is the new product codes have “J” on the end – oh and installation is much easier too, so you’ll spend less time on site.