ThermoSphere © All rights reserved 2020
The Gas Heating Ban 2025 and SAP 10
Here is a quick guide for everything you need to know about the government’s plan to ban gas boilers in new homes by 2025.
How did it come about?
Way back in March 2019 and following a report from the independent Committee on Climate Change, the Chancellor Philip Hammond stated that a plan will be put in place to ban gas heating in new homes by 2025. This was also part of a larger response to help address the protests about climate change.
What did the report say?
- It’s the committee’s job to lay down a pathway for the UK to meet its targets for reducing greenhouse gas emissions by 80% by 2050 (on 1990 levels).
- It costs £4,800 to install low-carbon heating in a new home – 5 times less than an existing house.
- Housing emissions mainly came from heating boilers.
- All homes in future will have to virtually eliminate emissions in order to meet challenging climate targets.
- New-build homes in the countryside to be warmed by heat pumps – and cooking done on induction hobs, rather than using gas boilers and hobs.
- In cities, new housing estates and flats should be kept warm by large networks of hot water.
- Potentially, waste heat from industry could be used to heat water.
- An alternative approach is to use heat pumps, which draw warmth from the sea or lakes; or burn gas from waste.
- Insulation is key so the heating requirement is less.
- The government is committed to investing £6bn to improve the energy efficiency of lower income and vulnerable households within the next 10 years.
What is CO2 and low-carbon power?
All known life on Earth is based on compounds of carbon. However, there is growing evidence that excessive emissions of carbon dioxide (CO2), is significantly contributing to global warming.
Low-carbon power comes from processes or technologies that produce power with much lower amounts of carbon dioxide emissions than is emitted from conventional fossil fuel power generation. Examples include; wind power, solar power, nuclear power and hydropower.
The table below shows the grams of CO2 produced per kWh of electricity by source (ref: Vattenfall Study)
|Source of power||Grams of CO2 per kWh|
Power sources such as nuclear, hydroelectric, wind and solar are potential big players to help achieve a low-carbon economy (LCE) and help reduce harmful emissions. A low carbon economy is an economy based on low carbon power sources that therefore has a minimal output of greenhouse gas (GHG) emissions into the biosphere,
The view of gas and electric power
Historically gas was seen as a cost-effective way to heat a property and it is the most common form of heating in the UK. A decade ago, gas and coal generated more than 70 per cent of the UK’s electricity. However, gas systems haven’t really evolved over time. The production of gas and use within the home produces a huge amount of CO2 emissions, which, as we all know, contradicts the government’s journey to a low carbon future. Gas systems are also expensive to install and retrofit.
Electric technology has significantly evolved over the years making it more efficient as well as easier and cheaper to install. Electric is a clean source of energy which is made almost 100% energy efficient and environmentally friendly because it can be generated from sources such as wind turbines and solar panels. The changes to SAP 10 (see further down in this article) has made it even easier for electric to be used in new housing developments too.
- A new generation of homes will be heated by low-carbon heat pumps and heat networks, with the Committee on Climate Change estimating that 2.5 million heat pumps could be installed in new homes by 2030 in order to meet future carbon targets.
- The Energy Saving Trust has argued that the homes of today and tomorrow need to be made as energy efficient as possible to ensure that the cost of new heating systems don’t drive up energy bills and put a dent in homeowners’ finances.
- Electric boilers are a potential alternative to natural gas boilers as they don’t produce carbon emissions when working, which is much better for our environment. However, they are not a completely green solution. If the electricity used to power them is generated by burning fossil fuels (rather than solar, water or wind power) they will still be contributing to the problem.
The importance of SAP 10
SAP is used to assess energy use and carbon emissions for Building Regulation Approved Document L in domestic buildings. The purpose of SAP is to assess the energy and environmental performance of new homes to ensure developments meet energy and environmental policy initiatives, as well as building regulations.
SAP 10 has been created to eventually replace SAP 2012 and one massive change is the CO2 emission factor for electricity. It has been reduced from 0.519 kgCO2/kWh to 0.233 kgCO2/kWh which is almost level with gas. Great! This means that a shift from gas to electric heating is more viable, so assessors in SAP 10 may find it easier to achieve compliance with electric heating.
If you have any questions, don’t hesitate to contact one of our team: 0800 019 5899